HCN5系列內燃機噴油器霧化檢測 汽油泵試驗臺；

技術參數：
1.量筒：45ml及150ml各一套（每套12支）
2.燃油箱容積：60L；
3.油溫自動控制：40±2℃；
4.試驗油濾油精度：5μ；
5.直流電壓12V和24V；
6.供油壓力：低壓：0~0.4Mpa，高壓：0~4Mpa;
7.泵體內壓顯示：0~0.16Mpa；
8.氣壓顯示：0~0.3Mpa
9.轉速預置：0~4000RPM可任意預置；
10.左右兩邊均可調速
11.中心高：125MM；
12.飛輪慣量：0.8KG.M

設備含包裝箱長220寬103 高167cm 重量約1050KG

12PSB series injection pump test bench:

Host frequency control, the speed can be preset, digital table display speed, count, oil temperature, gear.

Introduction of Functions and features:

01. Test the oil supply of each cylinder at different speeds

02. Static check the time of oil supply of each cylinder

03. Can control the operation of the equipment from the left and right sides, convenient for users to operate.

04. VE distribution pump solenoid valve test

05. The test bench speed count can be preset

06. Check the performance of the boost compensator

07. Check the transmission and supply capacity of the distribution pump

08. Measure the internal pressure of the distribution pump

09. Equipment speed can be set as required (0-4000 RPM)

10. Test the tightness of the injection pump.

11. Main motor power of the equipment: 18.5KW

12. Including the outer packing box size: length 220cm wide 102cm high 166cm

13. It weighs about 1050KG

14Power supply: three-phase 380V-400V 50/60HZ

Main technical parameters:

1. Measuring cylinder: 45ml and 150ml each (each set of 12)

2. Fuel tank capacity: 60L;

3. Oil temperature automatic control: 40±2℃;

4. Test oil filtration accuracy: 5μ.

5. Dc voltage 12V and 24V;

6. Oil supply pressure: low pressure: 0~0.4Mpa, high pressure: 0~4Mpa;

7. Pressure display inside the pump: 0~0.16Mpa;

8. Pressure display: 0~0.3Mpa

9. Speed preset: 0~4000RPM can be preset arbitrarily;

10. Speed can be adjusted on both sides

11. Center height: 125MM;

12. Inertia of flywheel: 0.8KG.M